RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT LIGHT CUT RELAY

    B0010Z8

    1. Remove the light cut relay from the engine room relay box.

    2. B0010VIE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the light cut relay.

    3. Install the light cut relay to the engine room relay box.