REAR DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A01X6H8E20
      *1 Component without harness connected: (Rear Door Courtesy Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - Body ground Pin not pushed Below 1 Ω
      1 - Body ground Pin pushed 10 kΩ or higher

      If the result is not as specified, there may be a malfunction in the rear door courtesy switch assembly.