ROOM LIGHT(for Rear) REMOVAL

PROCEDURE


  1. REMOVE NO. 3 ROOM LIGHT ASSEMBLY


    1. for Bulb Type:


      1. A01X3CPE01
        Text in Illustration
        *a Protective Tape

        Using a screwdriver, detach the 4 claws and remove the room light lens.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01X8DBE01

        Using a screwdriver, push the 2 levers in the directions indicated by the arrows shown in the illustration to detach the 2 claws (A).

      3. Detach the 2 claws (B).

      4. Detach the 4 claws and remove the No. 3 room light assembly from the room light switch base.

    2. for LED Type:


      1. A01WZFQE01
        Text in Illustration
        *a Protective Tape

        Using a screwdriver, detach the 4 claws and remove the room light lens.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01X76BE01

        Using a screwdriver, push the 2 levers in the directions indicated by the arrows shown in the illustration to detach the 2 claws (A).

      3. Detach the 2 claws (B).

      4. Disconnect the connector and remove the No. 3 room light assembly.

  2. REMOVE NO. 3 ROOM LIGHT BULB (for Bulb Type)

    A01X3CPE01

    1. Using a screwdriver, detach the 4 claws and remove the room light lens.

      Tech Tips

      Tape the screwdriver tip before use.

      Text in Illustration
      *a Protective Tape
    2. A01X3OG

      Remove the No. 3 roo light bulb.