ROOM LIGHT(for Center) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Bulb Type)


    1. w/ Spot Light:


      1. A01X51V

        Detach the 4 clips.

      2. A01X60H

        Detach the 10 claws No. 1 room light assembly from the room light switch base.

    2. w/o Spot Light:


      1. A01X3CPE01
        Text in Illustration
        *a Protective Tape

        Using a screwdriver, detach the 4 claws and remove the room light lens.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01X8DBE01

        Using a screwdriver, push the 2 levers in the directions indicated by the arrows shown in the illustration to detach the 2 claws (A).

      3. Detach the 2 claws (B).

      4. A01X3MF

        Detach the 4 claws No. 1 room light assembly from the room light switch base.

  2. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for LED Type)


    1. w/ Spot Light:


      1. A01X8XC

        Detach the 4 clips.

      2. Disconnect the connector and remove the No. 1 room light assembly.

    2. w/o Spot Light:


      1. A01WZFQE01
        Text in Illustration
        *a Protective Tape

        Using a screwdriver, detach the 4 claws and remove the room light lens.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01X76BE01

        Using a screwdriver, push the 2 levers in the directions indicated by the arrows shown in the illustration to detach the 2 claws (A).

      3. Detach the 2 claws (B).

      4. Disconnect the connector and remove the No. 1 room light assembly.

  3. REMOVE NO. 1 ROOM LIGHT BULB (for Bulb Type)


    1. w/ Spot Light:


      1. A01X9ZFE01
        Text in Illustration
        *a Protective Tape

        Using a screwdriver, detach the 3 claws and 3 guides and remove the room light lens.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01X0ZP

        Remove the No. 1 room light bulb.

    2. w/o Spot Light:


      1. A01X3CPE01
        Text in Illustration
        *a Protective Tape

        Using a screwdriver, detach the 4 claws and remove the room light lens.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01X3OG

        Remove the No. 1 room light bulb.