VANITY LIGHT INSPECTION

PROCEDURE

1. Click here

   INSPECT VISOR ASSEMBLY LH (VANITY LIGHT)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 2 (B) - 1 (E) Visor raised 10 kΩ or higher 2 (B) - 1 (E) Visor lowered and mirror cover closed 10 kΩ or higher 2 (B) - 1 (E) Visor lowered and mirror cover open Below 1 Ω

      If the result is not as specified, there may be a malfunction in the visor assembly LH (vanity light).

      Table 1. Text in Illustration

      *a	Component without harness connected (Visor Assembly LH (Vanity Light))

2. Click here

   INSPECT VISOR ASSEMBLY RH (VANITY LIGHT)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 (B) - 2 (E) Visor raised 10 kΩ or higher 1 (B) - 2 (E) Visor lowered and mirror cover closed 10 kΩ or higher 1 (B) - 2 (E) Visor lowered and mirror cover open Below 1 Ω

      If the result is not as specified, there may be a malfunction in the visor assembly RH (vanity light).

      Table 2. Text in Illustration

      *a	Component without harness connected (Visor Assembly RH (Vanity Light))