GLOVE BOX LIGHT INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSPECT GLOVE BOX LIGHT ASSEMBLY

    A01X4VBE01
    Text in Illustration
    *a

    Component without harness connected

    (Glove Box Light Assembly)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative(-) → 1 (L)

      		 Illuminates

      If the result is not as specified, replace the glove box light assembly.