GLOVE BOX LIGHT INSPECTION

PROCEDURE


  1. INSPECT GLOVE BOX LIGHT ASSEMBLY


    1. A01X8B8E01
      *1 Component without harness connected: (Glove Box Light)

      Apply battery voltage to the connector, and check the LED illumination condition.

      OK
      Measurement Condition Switch Condition Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery positive (-) → Terminal 2 (E)

      		 Not pushed Light illuminates

      If the result is not as specified, there may be a malfunction in the glove box light assembly.