ENTRY LOCK AND UNLOCK SWITCH(for Front) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH


    1. B001WDL

      Pull and hold the bellcrank lever of the front door outside handle frame sub-assembly LH.

    2. Install the front door outside handle assembly LH by pushing it in the direction of the arrow in the illustration.

    3. B001W3U

      Attach the 3 claws to install the connector and connector cove.

    4. Connect the connector.

  2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER

    Click here

  3. INSTALL FRONT DOOR SERVICE HOLE COVER LH

    Click here

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  5. INSTALL COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)

    Click here

  6. INSTALL DOOR ASSIST GRIP COVER LH

    Click here

  7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH

    Click here

  8. INSTALL FRONT UPPER ARMREST BASE PANEL LH

    Click here

  9. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.