ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE

1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR

   
   

   1. 

      Attach the 2 claws to install the electrical key oscillator.

   2. Connect the connector.

   3. Install the front floor carpet assembly.

2. INSTALL REAR NO. 2 SEAT PROTECTOR

   Click here

3. INSTALL REAR NO. 1 SEAT PROTECTOR

   Click here

4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

   
   

   1. Install the front quarter trim panel assembly LH Click here.

5. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

   
   

   1. Install the front quarter trim panel assembly RH Click here.

6. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

   
   

   1. Install the rear No. 1 seat assembly LH Click here.

7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

   
   

   1. Install the rear No. 1 seat assembly RH Click here.

8. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)

   
   

   1. Install the rear No. 2seat assembly LH Click here.

9. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

   
   

   1. Install the rear No. 2seat assembly RH Click here.

10. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)

    
    

    1. Install the rear No. 2 seat assembly LH Click here.

11. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

    
    

    1. Install the rear No. 2 seat assembly RH Click here.

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

13. CHECK SRS WARNING LIGHT

    
    

    1. Check the SRS warning light Click here.