ELECTRICAL KEY OSCILLATOR(for Front Floor) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01X719

      Connect the connector.

    2. Attach the 2 claws to install the electrical key oscillator.

  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL UPPER CONSOLE PANEL

    Click here

  5. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

    Click here

  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Click here

  10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here