ENGINE HOOD COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL HOOD LOCK ASSEMBLY

   
   
   1. 

      Table 1.

      *1

      MP grease

      Apply MP grease to the sliding areas of the lock.

   2. 

      Connect the hood lock control cable.

   3. 

      Connect the connector.

   4. Install the hood lock with the 2 bolts and nut.

      5.5 N*m

      57 kgf*cm

      49 in.*lbf

   5. Install a new hood lock nut cap.

2. Click here

   INSTALL HOOD LOCK CONTROL CABLE COVER

   
   

   1. Attach the claw to install the cover.

   2. Install the 3 screws.

3. Click here

   INSTALL RADIATOR GRILLE

   Click here

4. Click here

   INSTALL UPPER RADIATOR SUPPORT SEAL

   (Click here)