DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| ACC SW | Engine switch / ON or OFF | ON: Engine switch on (ACC) OFF: Engine switch off |
"ON" is also displayed for this item when the engine switch is on (IG). |
| IG SW | Engine switch / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off |
"OFF" is also displayed for this item when the engine switch is on (ACC). |
| RR Door Courtesy SW | Rear door courtesy light switch RH / ON or OFF | ON: Rear door RH open OFF: Rear door RH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH / ON or OFF | ON: Rear door LH open OFF: Rear door LH closed |
- |
| Back Door Courtesy SW | Back door courtesy light switch / ON or OFF | ON: Back door open OFF: Back door closed |
- |
| FR Door Lock Pos | Front door RH unlock detection switch / LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch RH / ON or OFF | ON: Front door RH closed OFF: Front door RH open |
- |
| FL Door Lock Pos | Front door LH unlock detection switch / LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch LH / ON or OFF | ON: Front door LH closed OFF: Front door LH open |
- |
| Hood Courtesy SW | Engine hood courtesy switch / ON or OFF | ON: Engine hood closed OFF: Engine hood open |
- |
| RR-Door Lock Pos SW | Rear door RH unlock detection switch / ON or OFF | ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
- |
| RL-Door Lock Pos SW | Rear door LH unlock detection switch / ON or OFF | ON: Rear door LH or RH unlocked OFF: Rear door LH and RH locked |
- |
| Intrusion Sens OFF SW*1 | Intrusion sensor cancel switch / ON or OFF | ON: Intrusion sensor cancel switch on OFF: Intrusion sensor cancel switch off |
- |
| Glass Break Sensor Detection*5 | Glass breakage sensor detection / ON or OFF | ON: Glass breakage sensor detected OFF: Glass breakage sensor not detected |
- |
| Intrusion Sensor*1 | Status of the intrusion and tilt sensor detection / ON or OFF | ON: One of the conditons below is met
OFF: Both of the conditions below are met
|
- |
| Intrusion Sen Conn*1 | Intrusion and tilt sensor connecting / ON or OFF | ON: Intrusion and tilt sensor connected OFF: Intrusion and tilt sensor not connected |
- |
| Sealed Glas Brak Sen*5 | Glass breakage sensor connecting / With or Without | With: Glass breakage sensor connected Without: Glass breakage sensor not connected |
- |
| Intrusion Sensor Sound Detect*3 | Sound detection status of the intrusion sensor (theft warning ultrasonic sensor) / ON or OFF | ON: Sound detected OFF: Sound not detected |
Not available |
| Panic Function*6 | This function operates the theft deterrent system when the panic switch is pressed and held for 0.8 seconds / ON or OFF | Customized value displayed | - |
| Window Open Warning | This function is used to enable or disable the window open warning / ON or OFF | Customized value displayed | - |
| Slide Roof Open Warning*2 | This function is used to enable or disable the sliding roof open warning / ON or OFF | Customized value displayed | - |
| Intrusion Win Opened*1 | Setting of the customized item "Intrusion Win Opened" / ON or OFF | Customized value displayed | - |
| Security control with mechanism key*4 | Setting of the customized item "Security control with mechanism key"/ ON or OFF | Customized value displayed | - |
| The Number of DTC | Number of DTCs / 0 to 255 | Number of DTCs will be displayed | - |
*1: w/ Intrusion Sensor
*2: w/ Sliding Roof System
*3: Although the item is displayed on the GTS, it is not applicable to this vehicle.
*4: Vehicles displaying the item "Security control with mechanism key" on the GTS
*5: w/ Glass Breakage Sensor
*6: w/ Panic Switch
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Horn2*1 | Theft warning siren | OFF/ON | - |
| Vehicle Horn | Vehicle horns | OFF/ON | - |
| Security Horn*3 | Security horn | OFF/ON | - |
| Power for Intrusion sensor*2 | Intrusion and tilt sensor power supply | OFF/ON | - |
*1: w/ Theft Warning Siren Assembly
*2: w/ Intrusion Sensor
*3: w/ Security Horn Assembly
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator light | OFF/ON | - |