BACK DOOR LOCK(for Double Swing Out Type) REMOVAL

PROCEDURE


  1. REMOVE ASSIST GRIP LH

    Click here

  2. REMOVE DOOR INSIDE HANDLE BEZEL LH

    Click here

  3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY LH

    Click here

  4. REMOVE REAR ASSIST GRIP REINFORCEMENT LH

    Click here

  5. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY LH

    Click here

  6. REMOVE BACK DOOR SERVICE HOLE COVER LH

    Click here

  7. REMOVE BACK DOOR LOCK ASSEMBLY


    1. A01X11AE02

      Rotate the snap as shown in the illustration and disconnect the back door lock locking link from the back door lock control assembly.

    2. Disconnect the back door lock cable assembly from the back door remote control assembly.

      Text in Illustration
      *1 Snap
      *2 Back Door Lock Locking Link
      *3 Back Door Lock Control Assembly
      *4 Back Door Remote Control Assembly
      *5 Back Door Lock Cable Assembly
    3. A01X2TX

      Disconnect the 2 connectors.

    4. Using a T30 "TORX" socket wrench, remove the 4 screws and back door lock assembly.