Click here

BACK DOOR LOCK INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Note:

  • When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.

  • When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.

Click here

PROCEDURE


  1. Click here

    INSTALL BACK DOOR LOCK ASSEMBLY


    1. w/o Power Back Door:


      1. Install the back door lock assembly with the 3 bolts.

        13 N*m 133 kgf*cm 10 ft.*lbf

      2. Connect the connector.

    2. w/ Power Back Door:


      1. Install the back door lock assembly with the 4 bolts.

        13 N*m 133 kgf*cm 10 ft.*lbf

      2. Connect the 2 connectors.

  2. Click here

    INSTALL BACK DOOR LOCK COVER


    1. Attach the 4 claws to install the back door lock cover.

  3. Click here

    INSTALL BACK DOOR GARNISH

    Click here

  4. Click here

    INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  5. Click here

    INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  6. Click here

    INSTALL CENTER BACK DOOR GARNISH

    Click here