FRONT DOOR LOCK REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH

   Click here

4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL LH

   Click here

5. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH

   Click here

6. REMOVE DOOR ASSIST GRIP COVER LH

   Click here

7. REMOVE COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)

   Click here

8. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

   Click here

9. REMOVE FRONT DOOR SERVICE HOLE COVER LH

   Click here

10. REMOVE FRONT NO. 2 DOOR STIFFENER CUSHION

    Click here

11. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY LH

    Click here

12. REMOVE FRONT DOOR OUTSIDE HANDLE COVER LH

    Click here

13. REMOVE FRONT DOOR LOCK ASSEMBLY LH

    
    

    1. 

       Using a T30 "TORX" wrench, remove the 3 screws.

       Tech Tips

       Remove the door lock through the service hole.

       Note

       Be careful when removing the screws as the door lock may fall and become damaged.

14. REMOVE FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH

    Click here

15. REMOVE FRONT DOOR INSIDE LOCKING LH CABLE ASSEMBLY

    Click here