DOOR CONTROL BATTERY(for RHD) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL BATTERY

   
   

   1. 

      Connect the connector.

      Text in Illustration

      	Nut
      	Connector

   2. Attach the door control battery with the nut.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY

   Click here

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

   Click here

5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

   Click here

8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

   Click here

9. INSTALL COWL SIDE TRIM BOARD RH

   Click here

10. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

11. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

13. INSPECT SRS WARNING LIGHT

    
    

    1. Check the SRS warning light Click here