TRANSMITTER BATTERY(w/o Entry and Start System) REPLACEMENT

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. REMOVE TRANSMITTER HOUSING COVER


    1. A01XBB5E01
      Text in Illustration
      *1 Protective Tape

      Twist a screwdriver in the direction of the arrow in the illustration and remove the transmitter housing cover.

      Note

      Do not forcibly pry open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE


    1. A01X8RGE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver, remove the door control transmitter module.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE TRANSMITTER BATTERY


    1. A01X0X8

      Twist a coin in the direction of the arrow in the illustration and remove the transmitter battery cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

    2. A01X7EE

      Remove the battery (lithium battery: CR2016).

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may become damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. the transmitter may cease to work.

  4. INSTALL TRANSMITTER BATTERY


    1. A01X70L

      Install a new battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter battery cover interior free of dust and oil.

    2. A01X76F

      Install the transmitter battery cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  5. INSTALL DOOR CONTROL TRANSMITTER MODULE


    1. A01X30U

      Install the door control transmitter module.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  6. INSTALL TRANSMITTER HOUSING COVER


    1. A01X9X6

      Install the transmitter housing cover to the transmitter housing case.

    2. Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.