TRANSMITTER BATTERY(w/ Entry and Start System) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSMITTER BATTERY (for Type A)

    Note

    Take extra care when handling these precision electronic components.


    1. A01XALAE01

      Push the release hook knob and extract the emergency key.

    2. A01X2IK

      Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Text in Illustration
      B001YA8 Protective tape

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01X30A

      Using a screwdriver, remove the transmitter battery holder.

      Text in Illustration
      B001YA8 Protective tape

      Tech Tips

      Tape the screwdriver tip before use.

    4. A01X41H

      Using a screwdriver, remove the transmitter battery.

      Text in Illustration
      B001YA8 Protective tape

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may be damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE TRANSMITTER BATTERY (for Type B)

    Note

    Take extra care when handling these precision electronic components.


    1. A01X9ANE01

      Slide the release hook knob and extract the emergency key.

    2. A01X6ET

      Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Text in Illustration
      B001YA8 Protective tape

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01WZLN

      Remove the transmitter battery.

      Text in Illustration
      B001YA8 Protective tape

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may be damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

  3. INSTALL TRANSMITTER BATTERY (for Type A)


    1. A01X8V8

      Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A01X06Y

      Install the transmitter battery holder.

    3. A01XB7Z

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    4. A01X6SI

      Insert the mechanical key as shown in the illustration.

    5. Press one of the transmitter switches and check that the LED illuminates.

  4. INSTALL TRANSMITTER BATTERY (for Type B)


    1. A01X4CA

      Install a new transmitter battery with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A01XB37

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    3. A01X6EP

      Insert the mechanical key into the transmitter.

    4. Press one of the transmitter switches and check that the LED illuminates.