CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Utility / Customize.
Select the setting by referring to the table below.
| Display (item) | Default | Function | Setting |
|---|---|---|---|
| Wireless Control | ON | The function that turns the wireless door lock on or off. | ON or OFF |
| Hazard Answer Back | ON | When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. | ON or OFF |
| Open Door Warning | ON | If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds. | ON or OFF |
| Auto Lock Time | 30 s | The function that changes the time until relocking after unlocking the doors with the wireless door lock function. | 30 s, 60 s or 120 s |
| Wireless Buzzer Resp | ON | This function turns the wireless door lock buzzer response on or off. | ON or OFF |