UNLOCK WARNING SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER STEERING COLUMN COVER

    Click here

  4. REMOVE UPPER STEERING COLUMN COVER

    Click here

  5. REMOVE TRANSPONDER KEY AMPLIFIER

    Click here

  6. REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY

    Click here

  7. REMOVE UNLOCK WARNING SWITCH ASSEMBLY


    1. B001YO4

      Disconnect the unlock warning switch connector.

    2. Detach the 2 claws and slide the unlock warning switch as shown in the illustration.

    3. B001WMPE02
      Text in Illustration
      *1 Pin

      Push in the pin, slide the unlock warning switch as shown in the illustration and remove it.