UNLOCK WARNING SWITCH INSTALLATION

PROCEDURE

1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY

   
   

   1. 

      Text in Illustration

      *1

      Pin

      While pushing the pin, slide the warning switch to install it.

   2. 

      Connect the unlock warning switch connector.

2. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY

   Click here

3. INSTALL TRANSPONDER KEY AMPLIFIER

   Click here

4. INSTALL UPPER STEERING COLUMN COVER

   Click here

5. INSTALL LOWER STEERING COLUMN COVER

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.