WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting.

    5. Select the setting by referring to the table below.

      Wireless Door Lock
      Display Default Contents Setting
      Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
      Wireless Control ON Function that turns the wireless door lock function ON or OFF. ON/OFF
      Open Door Warning*1 ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds. ON/OFF
      Panic Alarm Function*2 ON Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds. ON/OFF
      Unlock 2 Operation OFF Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
      Auto Lock Time 30 s Function to change the time until relocking after unlocking with the wireless door lock function. 30 s/60 s/120 s
      Wireless Auto Lock ON Function to control the automatic relocking of doors after unlocking with the wireless door lock function. ON/OFF
      Wireless Buzzer Resp ON*3 Wireless buzzer response function. ON/OFF
      Wireless Buzzer Volume Level 7 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

      Tech Tips

      *1: Except China

      *2: w/ Panic Switch

      *3: Except Europe and China

      PSD & PBD Operation (w/ Power Back Door System)
      Display Default Contents Setting
      Wireless PBD Operation

      0.8 s

      1Motion*

      Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).

      Function to turn on/off the power back door wireless one motion open operation.*

      1 Oper or 2 Oper or 0.8 s or OFF

      1Motion or 1 Oper or 2 Oper or 0.8 s or OFF*

      Tech Tips

      *: Except Europe

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Turn the engine switch on (IG).

    2. Enter the following menus: Setup / Vehicle.

    3. Select the setting by referring to the table below.

      Door lock settings
      Display Default Contents Setting
      Remote 2-press unlock OFF Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
      Lock/unlock feedback lights ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
      Lock feedback volume Level 7 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7