RELAY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  4. REMOVE WINCH MAIN RELAY


    1. Disconnect the connector.

    2. Remove the 2 nuts and disconnect the 2 wires.

    3. Remove the 3 nuts and relay.

      B001XMT