WINCH UNIT REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE RADIATOR SIDE DEFLECTOR LH

    Click here

  3. REMOVE RADIATOR SIDE DEFLECTOR RH (w/o Air Cooled Transmission Oil Cooler)

    Click here

  4. REMOVE TRANSMISSION OIL COOLER AIR DUCT (w/ Air Cooled Transmission Oil Cooler)

    Click here

  5. REMOVE WINCH ASSEMBLY


    1. A01X3DG

      Remove the 9 bolts and mounting bracket.

    2. A01XAK9

      Detach the 2 claws and move the cover in the direction indicated by the arrow shown in the illustration.

    3. A01WZ61

      Disconnect the connector.

    4. Remove the nut and disconnect the wire.

    5. A01X4PO

      Using a crane or equivalent, remove the winch assembly.

      CAUTION:

      Be careful as the winch assembly is very heavy.