GRAPHIC DECAL REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FENDER STRIPE LH

    Tech Tips

    When removing the fender stripe LH, heat the vehicle body and fender stripe LH using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Fender Stripe LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and fender stripe LH excessively.


    1. Using a heat light, heat the vehicle body and fender stripe LH.

    2. Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.

      Tech Tips

      For snorkel-equipped vehicles, there is no fender stripe RH.

      A01X3KTE01
      Text in Illustration
      *A for Type A *B for Type B

  2. REMOVE FRONT DOOR STRIPE LH

    Tech Tips

    When removing the front door stripe LH, heat the vehicle body and front door stripe LH using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Front Door Stripe LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and front door stripe LH excessively.


    1. Using a heat light, heat the vehicle body and front door stripe LH.

    2. Pull back an edge of the front door stripe LH and pull it parallel to the vehicle body to remove it.

      A01WZ97E01
      Text in Illustration
      *A for Type A *B for Type B

  3. REMOVE REAR DOOR OUTSIDE STRIPE LH

    Tech Tips

    When removing the rear door outside stripe LH, heat the vehicle body and rear door outside stripe LH using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Rear Door Outside Stripe LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and rear door outside stripe LH excessively.


    1. Using a heat light, heat the vehicle body and rear door outside stripe LH.

    2. Pull back an edge of the rear door outside stripe LH and pull it parallel to the vehicle body to remove it.

      A01X41AE01
      Text in Illustration
      *A for Type A *B for Type B

  4. REMOVE FRONT QUARTER STRIPE LH

    Tech Tips

    When removing the front quarter stripe LH, heat the vehicle body and front quarter stripe LH using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Front Quarter Stripe LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and front quarter stripe LH excessively.


    1. Using a heat light, heat the vehicle body and front quarter stripe LH.

    2. Pull back an edge of the front quarter stripe LH and pull it parallel to the vehicle body to remove it.

      A01X33CE01
      Text in Illustration
      *A for Type A *B for Type B