NAVIGATION ANTENNA(for Instrument Panel Side) INSTALLATION

PROCEDURE

1. INSTALL NAVIGATION ANTENNA ASSEMBLY

   
   

   1. for LHD:

      
      

      1. Install the navigation antenna assembly with the 2 screws.

      2. Attach the 2 clamps.

   2. for RHD:

      
      

      1. Install the navigation antenna assembly with the 2 screws.

      2. Attach the 2 clamps.

2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. CHECK SRS WARNING LIGHT

   Click here