NAVIGATION ANTENNA(for Instrument Panel Side) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  4. REMOVE NAVIGATION ANTENNA ASSEMBLY


    1. for LHD:


      1. B001XCZ

        Detach the 2 clamps.

      2. Remove the 2 screws and navigation antenna assembly.

    2. for RHD:


      1. B001ZBU

        Detach the 2 clamps.

      2. Remove the 2 screws and navigation antenna assembly.