NAVIGATION ANTENNA(for Roof Side) INSTALLATION

PROCEDURE

1. INSTALL NAVIGATION ANTENNA

   
   

   1. 

      Align the positioning pin of the navigation antenna and set the antenna on the vehicle.

   2. Attach the 2 claws to install the navigation antenna.

   3. Install the navigation antenna nut.

      Torque:

      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

   4. Connect the 2 navigation antenna connectors.

   5. Attach the 2 claws to install the protector.

   6. Attach the 4 claws to install the 2 navigation antenna connectors.

2. INSTALL NO. 3 REAR ROOF AIR DUCT

   Click here

3. INSTALL NO. 4 REAR ROOF AIR DUCT

   Click here

4. INSTALL NO. 5 REAR ROOF AIR DUCT

   Click here

5. INSTALL ROOF HEADLINING ASSEMBLY

   
   

   1. w/ Sliding Roof:

      Click here

   2. w/o Sliding Roof:

      Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.