NAVIGATION ANTENNA(for Roof Side) INSTALLATION

PROCEDURE


  1. INSTALL TELEPHONE ANTENNA ASSEMBLY


    1. When reusing the telephone antenna assembly:


      1. Install a new seal.

    2. B001Y2R

      Attach the claws and guides to install the telephone antenna assembly as indicated by the arrows in the order shown in the illustration.

    3. B001VVK

      Temporarily install the telephone antenna assembly to the vehicle.

    4. Insert the a new washer and holder to install the telephone antenna assembly with the bolt.

      Torque:
      9.5 N*m  { 97 kgf*cm, 84 in.*lbf }

    5. Connect the connector.

  2. INSTALL REAR NO. 3 ROOF AIR DUCT

    Click here

  3. INSTALL REAR NO. 4 ROOF AIR DUCT

    Click here

  4. INSTALL REAR NO. 5 ROOF AIR DUCT

    Click here

  5. INSTALL ROOF HEADLINING ASSEMBLY


    1. w/ Sliding Roof Click here.

      w/o Sliding Roof Click here.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.