NAVIGATION ANTENNA(for Roof Side) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY


    1. w/ Sliding Roof:

      Click here

    2. w/o Sliding Roof:

      Click here

  4. REMOVE NO. 5 REAR ROOF AIR DUCT

    Click here

  5. REMOVE NO. 4 REAR ROOF AIR DUCT

    Click here

  6. REMOVE NO. 3 REAR ROOF AIR DUCT

    Click here

  7. REMOVE NAVIGATION ANTENNA


    1. A01X4K2

      Detach the 4 claws and remove the 2 navigation antenna connectors from the protector.

    2. A01X8TG

      Detach the 2 claws and remove the protector.

    3. A01XB0G

      Disconnect the 2 navigation antenna connectors.

    4. A01XA43

      Remove the navigation antenna nut.

    5. A01XA6F

      Detach the 2 claws and remove the navigation antenna.