HARD DISK DRIVE REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

    Click here

  4. REMOVE NO. 2 RADIO BRACKET

    Click here

  5. REMOVE HARD DISC


    1. A01X903

      Remove the 2 screws.

    2. A01X68A

      Move the cover in the direction of the arrow shown in the illustration to remove it.

    3. A01X5PS

      Remove the hard disc in the direction of the arrow shown in the illustration.