MULTI-DISPLAY(w/ Navigation System) INSTALLATION

PROCEDURE


  1. INSTALL MULTI-DISPLAY CONTROLLER BRACKET


    1. Install the multi-display controller bracket with the 4 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL MULTI-DISPLAY ASSEMBLY


    1. Connect the connectors.

    2. B001W1N

      Insert the multi-display assembly and attach the 3 clips and 4 claws on its backside.

      Note

      When inserting the multi-display assembly, do not press the knobs on it.

    3. B001VZXE01

      Install the multi-display assembly with the 2 screws and 2 bolts.

      Torque:
      Bolt A
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  3. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.