MULTI-DISPLAY(w/ Navigation System) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE MULTI-DISPLAY ASSEMBLY


    1. A01X1YP

      Remove the 2 screws and 2 bolts.

    2. A01X7KK

      Pull the multi-display assembly to detach the 2 clips and 6 claws on the backside of the multi-display assembly.

    3. Disconnect the connectors and remove the multi-display assembly.

  7. REMOVE NO. 1 RADIO RECEIVER BRACKET


    1. A01X52D

      Remove the 4 bolts and No. 1 radio receiver bracket.