DIGITAL AUDIO BROADCASTING ANTENNA REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY


    1. w/ Sliding Roof:

      Click here

    2. w/o Sliding Roof:

      Click here

  4. REMOVE NO. 2 REAR ROOF AIR DUCT

    Click here

  5. REMOVE NO. 5 REAR ROOF AIR DUCT

    Click here

  6. REMOVE NO. 4 REAR ROOF AIR DUCT

    Click here

  7. REMOVE NO. 3 REAR ROOF AIR DUCT

    Click here

  8. REMOVE NO. 1 REAR ROOF AIR DUCT

    Click here

  9. REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY


    1. w/o Roof Antenna:

      A01X2ITE01
      Text in Illustration
      *a Guide - -

      1. Disconnect the connector and remove the 2 bolts.

      2. Detach the 7 clamps and 2 guides and remove the digital audio broadcasting antenna assembly.

    2. w/ Roof Antenna:

      A01XBW8E01
      Text in Illustration
      *a Guide - -

      1. Disconnect each connector and remove the 2 bolts.

      2. Detach the 7 clamps and 2 guides and remove the digital audio broadcasting antenna assembly.