MULTI-MEDIA INTERFACE ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET


    1. Install the bracket with the 2 bolts.

  2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET


    1. Install the bracket with the 2 bolts.

  3. INSTALL MULTI-MEDIA INTERFACE ECU


    1. Install the multi-media interface ECU with the 2 bolts.

    2. Connect the connectors.

  4. INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. Install the carpet that was pulled back to remove the selector. For further details, refer to the installation procedure Click here.

  5. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  6. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

    Click here

  8. INSTALL INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat)


    1. Install the front seat assembly RH Click here.

  10. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat)


    1. Install the front seat assembly RH Click here.

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.