STEREO JACK ADAPTER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL REMOTE CONTROL ADAPTER ASSEMBLY

   
   

   1. 

      Attach the 4 claws to install the headphone terminal.

   2. 

      Install the 2 screws.

   3. Attach the clamp.

2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

   Click here

3. INSTALL RADIO WIRE

   
   

   1. for Automatic Transmission:

      
      

      1. 

         Connect the connector and remove the radio wire.

   2. for Manual Transmission:

      
      

      1. 

         Connect the connector and remove the radio wire.

4. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY

   
   

   1. for Automatic Transmission:

      
      

      1. 

         Attach the 2 claws to install the stereo jack adapter.

   2. for Manual Transmission:

      
      

      1. 

         Attach the 2 claws to install the stereo jack adapter.

5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

6. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

7. INSTALL UPPER CONSOLE PANEL

   Click here

8. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

   Click here

9. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

12. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

13. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

14. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.