BACK DOOR SPEAKER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE CENTER BACK DOOR GARNISH

    Click here

  4. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  5. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  6. REMOVE ASSIST GRIP (for Face to Face Seat Type)

    Click here

  7. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

    Click here

  8. REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

    Click here

  9. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  10. REMOVE REAR HEADER SPEAKER ASSEMBLY

    Tech Tips

    Use the same procedure as for the opposite side.


    1. B001XWD

      Remove the 3 screws.

    2. Disconnect the connector and remove the rear header speaker assembly.