REAR DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)


    1. B001YBQE01

      Align the speaker to the door position pins labeled A.

    2. Install the speaker with the 2 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Attach the clamp and connect the connector.

  2. INSTALL REAR SPEAKER SET


    1. B001WOL

      Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    2. Install the speaker with the 3 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Connect the connector.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. INSTALL DOOR ASSIST GRIP COVER LH

    Click here

  5. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY LH


    1. Connect the connector.

    2. B001WVH

      Attach the 7 claws to install the armrest base panel.

  6. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.