LUGGAGE SPEAKER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

    Tech Tips

    Use the same procedures described for the LH side Click here.

  5. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

    Tech Tips

    Use the same procedures described for the LH side Click here.

  6. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  7. REMOVE REAR STEP COVER

    Click here

  8. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  9. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

    Click here

  10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    Click here

  11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  12. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY


    1. B001YZT

      Disconnect the connector.

    2. Remove the 5 bolts and box speaker.