RADIO RECEIVER(w/o Stereo Component Amplifier) INSTALLATION

PROCEDURE


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

    Click here

  2. INSTALL CLOCK ASSEMBLY

    Click here

  3. INSTALL NO. 1 RADIO BRACKET


    1. A01X13Q

      Install the bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  4. INSTALL NO. 2 RADIO BRACKET


    1. A01X8Y8

      Install the bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A01XAJF

      Install the radio receiver with the 2 screws and 2 bolts.

      Torque:
      Bolt
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


    1. A01XARI

      Insert the cluster finish panel and attach the 10 claws on its backside to install it.

  7. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  8. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  9. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.