RADIO RECEIVER(w/o Stereo Component Amplifier) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. w/o Entry and Start System:


      1. B001VRR

        Remove the 2 screws and 2 bolts.

      2. Disconnect the connectors and remove the radio receiver.

    2. w/ Entry and Start System:


      1. B001WLL

        Remove the 2 screws and 2 bolts.

      2. Disconnect the connectors and remove the radio receiver.

  8. REMOVE NO. 1 RADIO BRACKET


    1. w/o Entry and Start System:


      1. B001ZZ9

        Remove the 3 screws and bracket.

    2. w/ Entry and Start System:


      1. B001XJO

        Remove the 3 screws and bracket.

  9. REMOVE NO. 2 RADIO BRACKET


    1. w/o Entry and Start System:


      1. B001XQG

        Remove the 3 screws and bracket.

    2. w/ Entry and Start System:


      1. B001ZN1

        Remove the 3 screws and bracket.