RADIO RECEIVER(w/o Multi-display) INSTALLATION

PROCEDURE


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

    Click here

  2. INSTALL CLOCK ASSEMBLY

    Click here

  3. INSTALL NO. 1 RADIO BRACKET


    1. A01X06W

      Install the bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  4. INSTALL NO. 2 RADIO BRACKET


    1. A01X1Y3

      Install the bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A01X4WV

      Insert the radio receiver to attach the 10 claws on its backside.

      Note

      When inserting the radio receiver, do not press the knobs on it.

    3. A01X79Z

      Install the radio receiver with the 2 screws and 2 bolts.

      Torque:
      Bolt
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  8. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.