RADIO RECEIVER(w/o Multi-display) INSTALLATION

PROCEDURE


  1. INSTALL CLOCK ASSEMBLY

    Click here

  2. INSTALL NO. 1 RADIO BRACKET


    1. B001Y4V

      Install the bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL NO. 2 RADIO BRACKET


    1. B00203W

      Install the bracket with the 3 screw.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. B001YCM

      Insert the radio and display receiver assembly with bracket to attach the 6 claws and 2 clips on its backside.

      Note

      When inserting the radio and display receiver assembly with bracket, do not press the knobs on it.

    3. B001Z0VE01

      Install the radio and display receiver assembly with bracket with the 2 screws and 2 bolts.

      Torque:
      Bolt
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  5. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.