RADIO RECEIVER(w/o Multi-display) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET


    1. B001Z0V

      Remove the 2 screws and 2 bolts.

    2. B001YCM

      Pull the radio and display receiver assembly with bracket to detach the 6 claws and 2 clips on the backside of the radio and display receiver assembly with bracket.

    3. Disconnect the connectors and remove the radio and display receiver assembly with bracket.

  7. REMOVE NO. 1 RADIO BRACKET


    1. B001Y4V

      Remove the 3 screws and bracket.

  8. REMOVE NO. 2 RADIO BRACKET


    1. B00203W

      Remove the 3 screws and bracket.

  9. REMOVE CLOCK ASSEMBLY

    Click here