RADIO RECEIVER(w/o Multi-display) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A01X79Z

      Remove the 2 screws and 2 bolts.

    2. A01X419

      Pull the radio receiver to detach the 10 claws on the backside of the radio receiver.

    3. Disconnect the connectors and remove the radio receiver.

  7. REMOVE NO. 1 RADIO BRACKET


    1. A01X06W

      Remove the 3 bolts and bracket.

  8. REMOVE NO. 2 RADIO BRACKET


    1. A01X1Y3

      Remove the 3 bolts and bracket.

  9. REMOVE CLOCK ASSEMBLY

    Click here

  10. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY

    Click here