RADIO RECEIVER(w/ Multi-display) INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. Insert the multi-media module receiver assembly to attach the 5 claws on its backside.

      Note

      When inserting the multi-media module receiver assembly, do not press the knobs on it.

    3. B001XGQE01

      Install the multi-media module receiver assembly with the 2 screws and 2 bolts.

      Torque:
      Bolt A
      8.5 N*m  { 87 kgf*cm, 75 ft.*lbf }

  4. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET

    Click here

  5. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  10. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.