RADIO RECEIVER(w/ Multi-display) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  6. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  9. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  10. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  11. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET

    Click here

  12. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. B001XGQ

      Remove the 2 screws and 2 bolts.

    2. B001ZVD

      Pull the multi-media module receiver assembly to detach the 5 claws on the backside of the multi-media module receiver assembly.

    3. Disconnect the connectors and remove the multi-media module receiver assembly.

  13. REMOVE NO. 1 RADIO BRACKET


    1. B001W35

      Remove the 3 screws and No. 1 radio bracket.

  14. REMOVE NO. 2 RADIO BRACKET


    1. B001YCE

      Remove the 3 screws and No. 2 radio bracket.