REAR SEAT ENTERTAINMENT SYSTEM, Diagnostic DTC:B15B0

DTC Code DTC Name
B15B0 Display Screen Malfunction

DESCRIPTION

This DTC is stored when a malfunction occurs in the television display assembly.

DTC Code DTC Detection Condition Trouble Area
B15B0

When either condition below is met:


  • Picture circuit (TFT unit) malfunction

  • Back light malfunction (excess current)

  • Television display assembly

  • Multi-display assembly

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTCs Click here.


    NEXT

  2. RECHECK DTC


    1. Recheck for DTCs Click here.

      Result
      Result Proceed to
      DTC B15B0 is not output. A
      DTC B15B0 is output. B

      Tech Tips


      • This DTC is output from the multi-media module receiver assembly or television display assembly.

      • When the DTC is checked using the intelligent tester, whether the DTC is output from the multi-media module receiver assembly, or whether it is output from the television display assembly, cannot be distinguished. For this reason, recheck the DTC using the "System Check Mode" screen.


      1. Enter diagnostic mode and display the "Service Menu" screen Click here.

      2. Select "Failure Diagnosis Service Check" on the "Service Menu" screen to display the "Failure Diagnosis Service Check" screen.

      3. Select "Service Check Mode" on the "Failure Diagnosis Service Check" screen and perform the service check.

      4. Recheck for DTCs and proceed to the next step according to the table below Click here.

        Result
        Result Proceed to
        DTC is not output A
        DTC is output from the multi-media module receiver assembly. B
        DTC is output from a television display assembly. C

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE MULTI-DISPLAY ASSEMBLY Click here

    C

    REPLACE TELEVISION DISPLAY ASSEMBLY Click here