REAR SEAT ENTERTAINMENT SYSTEM Visual Mute Signal Circuit between Radio Receiver and Multi-display Controller

DESCRIPTION

This is the visual mute signal circuit between the multi-media module receiver assembly and the multi-display controller sub-assembly.

WIRING DIAGRAM

A01X69UE12
*1 Multi-display Controller Sub-assembly
*2 Multi-media Module Receiver Assembly

PROCEDURE


  1. CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. A01X6HJE01
      Text in Illustration
      *a

      Component with harness connected

      (Multi-media Module Receiver Assembly)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      F77-9 (VMTR) - Body ground RSE playing → Source changed Higher than 3.5 V → Below 1 V

    OK
    NG
  2. CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY)


    1. Disconnect the F77 multi-media module receiver assembly connector.

    2. Disconnect the L67 multi-display controller sub-assembly connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      F77-9 (VMTR) - L67-8 (VMTR) Always Below 1 Ω
      F77-9 (VMTR) - Body ground Always 10 kΩ or higher

    NG
    OK
  3. CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. Disconnect the multi-display controller sub-assembly connector.

    2. A01X02PE01
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Multi-display Controller Sub-assembly)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      L67-8 (VMTR) - Body ground RSE playing → Source changed Higher than 3.5 V → Below 1 V

    OK
    NG