AUDIO AND VISUAL SYSTEM(w/ Navigation System) Display Signal Circuit between Multi-display and Radio Receiver

DESCRIPTION

The display image signal from the multi-media module receiver assembly is sent to the multi-display assembly using a digital communication cable.

WIRING DIAGRAM

A01XBS0E37
*a Multi-display Assembly
*b Multi-media Module Receiver Assembly
*c Digital Communication Cable

PROCEDURE


  1. CHECK DIGITAL COMMUNICATION CABLE CONNECTOR


    1. Check if the digital communication cable connectors between the multi-media module receiver assembly and the multi-display assembly have any connection problems Click here.

    2. Check that the screen display is normal.

      OK
      Screen display is normal.

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

  2. CHECK MULTI-DISPLAY ASSEMBLY


    1. Replace the multi-display assembly with a new or normally functioning one Click here.

    2. Check that the screen display is normal.

      OK
      Screen display is normal.

    OK

    END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE)

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here